18K Gold Plated Sterling Silver Multi-Colour Cubic Zirconia Hoops Necklace

Our Jewelry Sizing Guide

Finding the perfect fit is easy! Use our guide below to determine the correct size for your rings, necklaces, and bracelets. A proper fit ensures your new jewellery is comfortable and looks its best.

Ring Sizing

How to Find Your Ring Size

The most accurate way to find your ring size is to have your finger professionally measured at a local jewellery store. If you can't do that, here are two simple methods to measure at home.

Method 1: Measure a Ring You Already Own

1. Select a ring that properly fits the intended finger.

2. Using a ruler, measure the inside diameter of the ring in millimetres (mm).

3. Match that measurement to the corresponding size in the chart below.

Method 2: Measure Your Finger with String

1. Wrap a piece of non-stretchy string or a strip of paper around the base of the finger you want to measure.

2. Make sure it's snug, but not too tight—it should be able to slide over your knuckle.

3. Mark the point where the end overlaps.

4. Unwrap the string or paper and lay it flat. Measure the length from the start to your mark in millimetres (mm). This is your finger's circumference.

5. Match that measurement to the corresponding size in the chart below.

Tips for Accuracy:

• Measure your finger at the end of the day when it's likely to be at its largest.

• Avoid measuring when you're cold, as your fingers can be smaller.

• If your knuckle is much larger than the base of your finger, measure both areas and choose a size in between.

International Ring Size Conversion Chart

Necklace Sizing

Necklace lengths are a matter of personal style. The diagram below shows how common necklace lengths typically fall.

Common Necklace Lengths & Styles

How to Choose Your Length: Use a flexible measuring tape to see where each length will fall on your own frame. Consider the types of necklines you wear most often and whether you plan to layer your necklaces.

Bracelet Sizing

How to Find Your Bracelet Size

1. Use a flexible measuring tape or a piece of string to measure your wrist.

2. Wrap it snugly around your wrist, just below the wrist bone.

3. Read the measurement (if using a tape) or mark and measure the string with a ruler. This is your wrist measurement.

4. Now, add a little length to find your ideal bracelet size based on your preferred fit.

Choosing Your Fit

• For a Snug Fit: Add $1/4$ to $1/2$ inch ($1$ cm) to your wrist measurement.

• For a "Just Right" Comfort Fit: Add $3/4$ to $1$ inch ($2$ cm) to your wrist measurement. (This is the most common).

• For a Loose Fit: Add $1$ to $11/4$ inches ($3$ cm) to your wrist measurement.

Example: If your wrist measures 6.5 inches, a standard comfort-fit bracelet would be 7.25 to 7.5 inches.

Standard Bracelet Sizes